VoIP caller ID → POS terminals
Your cashiers should still know who’s on the line.
VoIP Reporter sits quietly on your network, reads your VoIP call signaling, and sends caller ID straight to the POS terminals you already run — the same name-and-number pop-up you had on analog lines, now over SIP.
No PBX changes · no per-line phone-company fees · works with your existing POS caller-ID software
How it works
Three steps from wire to register.
VoIP Reporter is a small, purpose-built box. It doesn’t replace your phone system or your POS — it bridges the gap between them.
Bridge it in
Place VoIP Reporter inline on your phone network. It reads traffic passively — it never modifies, delays, or drops a call.
It identifies every caller
The box parses your SIP signaling in real time, sorts inbound from outbound, and pulls the best available caller ID from the call headers.
Your POS pops the call
It broadcasts caller ID to your terminals over UDP on port 3520 — the format existing POS caller-ID software already understands. No new POS software required.
What you get
Built to sit on the wire and be forgotten.
Won’t slow your network
Bridges your traffic at full line rate on dual 2.5 GbE, reading signaling as it passes. Calls and data move exactly as fast as before — you won’t know it’s there.
Works with what you have
Sends the same UDP caller-ID format POS systems have consumed for years, on port 3520. Nothing to install on the register.
Inbound and outbound
Reports both directions, with ring counts, matched start and end records, and call duration.
One price, every line
No per-line or per-channel fees. A single license covers as many lines as you want to run — there’s no meter to top up.
Status at a glance
Plug in HDMI for a live status display, or open the built-in web console to configure everything.
Runs unattended
Purpose-built on a fanless NanoPi R5S with dual 2.5 GbE. Set it once and leave it.
- Hardware
- FriendlyElec NanoPi R5S · fanless · aarch64
- Network
- 2× 2.5 GbE bridged inline + 1 GbE management
- Output
- UDP broadcast · port 3520 · comprehensive format
- Signaling
- SIP (INVITE / 200 OK / BYE / CANCEL) · inbound + outbound
- Licensing
- Ed25519, device-bound · unlimited lines, one license
- Config
- Built-in web console · HDMI status display
Pricing
Buy a box, or license the software.
Want it turnkey? Get the built unit. Comfortable with the hardware, or running several sites? License the software and install it on your own boxes.
A built, tested, licensed box. Plug it in and go.
- Fully assembled NanoPi R5S
- Software pre-installed & licensed
- Ready for your POS out of the box
- Ships to you — nothing to flash
Already have hardware, or want several? License the software and install it yourself.
- Install on your own NanoPi R5S (~$100)
- Deploy as many units as you need
- Same firmware and updates
- Unlimited lines — no per-channel fees
The software, licensed to you and no one else. We take it off the market.
- Everything in the software license
- Sold once — never resold to anyone else
- Deploy across all of your sites
- Terms handled directly with us